FREE RETURNS. STANDARD SHIPPING ORDERS $99+
Showing 129–144 of 180 results
Cut openings for windows, doors, sinks, etc. The point plunges through covering material while the collar rides against a stud, electrical box, etc. to guide the flush trim flute to produce a matching opening. Carbide tipped or solid carbide.
Plunging Roundovers (Ovolo) are ideal for furniture makers. Use the plunging feature to create unusual grooves and veins, or use as a roundover bit for clean roundover and bead edges. Because they have no bearings, these bits should be used with a router edge guide, a router table with fence or in CNC applications. Carbide tipped.
3 8″ Diameter, 1″ Cut Length , 2-3 4″ Overall, 1 2″ Shank
These bits have a center carbide tooth on the bottom for plunge cuts. They are engineered to provide you with good control throughout the cut and a smooth, flat bottom. Plunging bits are great for stopped dadoes, mortising, grooves and much more. Carbide tipped.
Perfect for lettering and sign making, beading, veining, turning legs, enhancing design, and general surface design. Due to the delicate nature of the pointed bits, standard warranty does not apply. Carbide tipped or solid carbide.
Set consists of three 1 2″ shank bits, one 5 16″ diameter x 1″ straight bit, one 5 8″ 7° dovetail bit, and one 3 4″ 14° dovetail bit. Packaged in a lidded wood box. Sorry, we cannot provide warranty support for this item.
8-Piece Profile Bit Set Set includes all the most commonly used edge profile router bits used in the industry. 1 2 Shank Carbide Tipped Professional Quality Custom-made hardwood storage case included. Set includes: 220-30 3 8 Radius Cove bit 220-34 1 2 Radius Cove bit 240-22 1 4 Radius Roman Ogee bit 260-14 Rabbet bit…
A rabbet is simply a rectangular recess along the edge or end of a piece of material. It is a common joint in cabinet casework, but is also used in recessing cabinet doors in face frames, as a recess for holding artwork or a mirror in a frame, in a molding application, or for half-lap or shiplap joints….
Produce rail and stile door frames for cabinet doors. These bits don t need to be taken apart, reversed, or have parts swapped. Just raise and lower bit in your router table to change cuts. Or make it even easier by using a 3 8″ thick sled to raise the material to the correct height…
Our 2 pc rail & stile sets are factory-matched with precision grinding for a perfect fit every time. The included full enclosed bearing allows you to follow templates to make arched doors. The TriStar™ line features three wings of carbide for reduced chip load, smoother cuts, and longer life. Carbide tipped.
These 2pc matched sets produce the same profiles as our other 2pc sets, but all have 1 4 shanks. Because they have 1 4 shanks, extra care and multiple passes MUST be taken to reduce the possibility of injury to you or the cutters. Carbide tipped.
Raised panel doors are the standard for cabinets, jewelry boxes, entry and passage doors, fine furniture, and more. With undercutter (UC) is our most popular option which cuts back side of the door at the same time the profile is cut, making a 1 4 tongue to fit the slot in rail & stile. Be…
Use this bit to edge join materials with a maximum gluing surface for tabletops or large panels. The slight taper aids in aligning the boards by drawing the surfaces together to produce perfectly aligned faces on jointed surfaces. When clamping, apply enough pressure to seal the joint, but too much pressure may distort the wood….
Switching from the stile cut to the rail cut is simple by rearranging the cutters and bearing on the arbor. Because the profile and the cope are cut with the same cutter, you are sure to get a perfect fit. The assembly order for each setup is shown in the drawing. Use the pilot bearing only for…
This graceful shape is a universal classic. One of these bits should be a staple of any workshop. Carbide tipped.
Applies a convex radius edge on table, drawer or cabinetry edges or small finish moldings. By substituting a smaller 3 8 bearing (83019) an inset at the base of the cut produces a more decorative edge. Carbide tipped. Replacement bearing for roundover bits is 83022.
End of content
End of content
No products in the cart.
